3aciscoswitch.over-blog.com

Question: We've recently Cisco 3925 changed data line providers and now have some Cisco 877 routers we'd like to reconfigure and use at other sites. Although we own these, they were configured by our old data line providers, I'm having a hard time of...

Read more

Question: It looks you can Cisco 3945 price switchover to the redundant RP by "redundancy force-switchover" command. But what about the ESP? How can I switchoever to the redundant ESP w/o waiting for a failure on active blade to occur? I've gone through...

Read more

Question: Since long I WS-C3750V2-48PS-S am trying to find the correct answer for this. Why protocols like OSPF and ICMP do not use any Transport protocol like TCP/UDP ?? Answer: OSPF and ICMP are built directly over IP for the specific purposes they...

Read more

Question: My customer has Cisco 2951 various Cisco switches but only cisco 2950 switches has the problem of ping timeout or reply time is too long(average more than 2 sec). It will cause I Network Mangement software alarm always. Anyone has this problem?...

Read more

Question: I 'm trying to WS-C3750X-24T-L Price set up a home lab with a couple of 28XX and 2651XM series routers. I would like to simulate a frame-relay connection between HQ, Branch1 and Branch2 . All of them are conneced to a PSTN switch (2811 router)...

Read more

Question: I have an issue where I have Cisco 2921 price a router with 2 Wan exit points. I have setup IPSLA to roll from a 3G connection to a Vsat connection if the 3G internet path is unavailable. All looks ok and I get reliable route updates in the...

Read more

Question: I know that with Cisco 2911-SEC Serial interfaces I can do MLPPP but so far what I have seen says that the serial interface get a "no IP address" and joined to the multilink bundle which has the IP address. What can I do to bundle something...

Read more

Question: I have route-map defined on WS-C3750X-24P-S my ASR 1002 12.2(33)XNE and applied to my gi0/0/1 interface. I need to change the IP address defined on the "set ip next-hop ..." line. My question is, when I make the change in just the route-map...

Read more

Question: I have a PBR with WS-C3750X-48PF-L route-map applied on the LAN interface of the router. PBR has below route-map : R1 : route-map PBR permit 10 match ip address OFFLOAD set ip next-hop 172.16.1.5 ACL contents : ip access-list extended OFFLOAD...

Read more

Question: Having problems WS-C3560X-48P-L with the HWIC-3G-HSPA-G cards and crypto tunnels. We have recently ordered the new HWIC-3G-HSPA-G cards and are suddenly seeing some very weird things across these cards, specifically wrt crypto and the card resetting...

Read more